Do it yourself
Frequently asked questions about cars and motorcycles

How do you repair the rear hatch of the Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

When the rear hatch of the Fiat 500 is not functioning properly, it is likely that the wiring inside is damaged: therefore it will be necessary to restore it by opening the hatch and using a tool to remove the internal trim panels of the hatch itself.

Once these panels have been removed, it will be possible to proceed by replacing or restoring the cables underneath them; then once the repair is done, it will be possible to reposition the panel and verify that everything is functioning correctly.


Posted on 1 June 2025 by ScegliAuto


Related tutorials

Fiat 500 (2014-2022 / 500 X) On the Fiat 500X, the boot may become stuck, possibly due to a faulty control button or lock actuator. In such cases, you can still perform an emerge…
Fiat 500 (2007-2022 / ) This tutorial demonstrates how to open the tailgate of a Fiat 500 from the inside, a quick and simple operation to perform if the corresponding contr…
Fiat 500 (2007-2022 / 312) To replace the rear light bulb of the Fiat 500, open the rear hatch of the car to access the screws securing the light unit: by loosening these screw…

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2021 - Why is the ESC not available on the Fiat 500? Read answer
    • 500 2007-2022 - Where is the inertia switch located in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos