How to Remove the Front Shock Absorber on a Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Shocks

See other generations:

This video is currently unavailable

Loosen the wheel nuts, lift the vehicle on a column lift, and remove the wheel. Use a socket to unscrew the bolts securing the shock absorber to the wheel hub (disconnect the brake line tubes with a screwdriver).

Lower the vehicle with the lift and unscrew the bolts on the side (top part of the shock absorber), then remove the shock absorber from its housing. Compare the old part with the new one and prepare to mount the shock absorber onto the spring using a compression tool.

Once assembled, proceed to install the shock absorber.

Updated on 4 March 2026 by ScegliAuto

Other guides you may be interested in

Wheel - Maintenance and repair on other vehicles

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!

by ScegliAuto

How to Remove the Front Shock Absorber on a Fiat Ducato

Related tutorials

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

More videos