Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : How to remove the front shock absorber on a Fiat Ducato

Fiat Ducato - Video tutorial

Model: Fiat Ducato X250 - Years 2006-2014
Part: Shock absorbers
Operation: How to remove the front shock absorber on a Fiat Ducato

How to remove the front shock absorber on a Fiat Ducato? The first step to follow: let's lift the engine hood and put it in safety. Using a special socket wrench, unscrew the shock absorber locking pins (after removing the brushes and the plastic panel under the windshield), lift the car onto a column bridge and remove the front wheel. Unscrew the locking pins of the shock absorber to the wheel hub with a socket wrench (remove the brake circuit tubes with a screwdriver). Unscrew the pins on the side, remove the shock absorber from its housing (place a support support under the bar). Let's compare the old piece with the new one and get ready for assembly. We mount the new shock absorber on the car by working backwards.


Posted on 25 October 2023 by ScegliAuto



How to remove the front shock absorber on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) .. How to remove the front shock absorber on a Fiat Ducato? We loosen the pins of the rim, lift the car..
How do you replace the front shock absorber on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) In order to replace the front shock absorber of the Fiat Ducato, the vehicle must be lifted so that the wheels are not in contact with the floor: in
How to remove the front shock absorber on a Fiat Ducato
Fiat Ducato (2014-2023 / X290) .. How to remove the front shock absorber on a Fiat Ducato? The first step to follow: with a special socket..

Other guides that may interest you

    Frequently Asked Questions

    • Ducato 2006-2014 - How do you disassemble the right front shock absorber of the Fiat Ducato x250? Read Answer

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos