Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program a second key on the Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Key

Programming a second key on a vehicle is a simple and quick operation to perform independently, as on some vehicles it is not necessary to connect any computer equipment. Taking the Fiat 500 X as an example, to program the second key we must enter the vehicle with the original key and close the doors. Press the lock and unlock buttons on the remote of the new key and insert the key into the ignition switch. Start and turn off the ignition three times. After completing these steps, the key will be programmed for the next use.

Posted on 13 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key for the Fiat 500X?
How do you program the key for the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) It will be possible to program the key for the Fiat 500X by inserting the virgin key into the ignition switch and turning it to start the instrument …
How do you program the key of the Fiat 500X?
How do you program the key of the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) In order to program the key of the Fiat 500X, it will be necessary to insert the blank key into the corresponding lock and turn it to position two to…
How to Start the Fiat 500X with a Key Without a Battery
How to Start the Fiat 500X with a Key Without a Battery
Fiat 500 (2014-2022 / 500 X) The Fiat 500X has an electronic key detection system that prevents the car from starting and moving if you do not have the key or if the key's batter…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos