Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Fiat Ducato 2.0 Multijet

Model: Fiat Ducato X290 - Years 2014-2026
Part: Timing belt

The following information will allow us to disassemble and replace the timing belt of the Fiat Ducato 2.0 Multijet. First, we open the vehicle's hood and start by disassembling and removing the front bumper, unscrewing all the fixing screws; then we lift the vehicle and remove the right front wheel, disconnecting the V-belt and removing the crankshaft pulley. At this point, we remove the distribution cover to access the belt, taking the necessary references for the replacement; if necessary, we also replace the water pump kit, finally reassembling all the distribution components.

Posted on 28 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 MultiJet
Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 MultiJet
Fiat Ducato (2006-2014 / X250) Let's look at the instructions on how to disassemble and replace the timing belt of the Fiat Ducato 2.3 MultiJet. First, we open the vehicle's hood a…
Guide to Replacing the Timing Belt on a Fiat Ducato 2.3 MultiJet
Guide to Replacing the Timing Belt on a Fiat Ducato 2.3 MultiJet
Fiat Ducato (2014-2026 / X290) In this guide, we will explore the steps to remove and replace the timing belt on a Fiat Ducato 2.3 MultiJet. First, open the engine bonnet of the ve…
Guide to replacing the timing belt of the Fiat Ducato 2.3 Multijet
Guide to replacing the timing belt of the Fiat Ducato 2.3 Multijet
Fiat Ducato (2014-2026 / X290) Today's main instructions will allow us to disassemble and replace the timing belt of the Fiat Ducato 2.3 Multijet. First, we lift the vehicle and st…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos