Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Position Lights with LEDs on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Headlight bulb

Let’s see how to replace the position lights with LEDs on a Fiat 500. Start by removing the plastic cover at the bottom of the bumper with an appropriate screwdriver; access the side fog light located in the bumper. After removing the lamp holder, take out the bulb to be replaced and fit a new one (same size and voltage). Refit the plastic cover under the car’s bumper with the attached clips. Test the lights to ensure they function correctly. Perform this replacement on both the front and rear lights to achieve uniform illumination.

Updated on 4 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Complete LED Light Conversion for Fiat 500X
Complete LED Light Conversion for Fiat 500X
Fiat 500 (2014-2022 / 500 X) Aesthetics matter, so today we will see how to replace the halogen lights on our Fiat. LED = more power, longer lifespan, great durability, and the a…
How to Replace the Bulbs with LEDs on a Fiat 500L
How to Replace the Bulbs with LEDs on a Fiat 500L
Fiat 500 (2014-2022 / 500 X) Follow these steps to replace the bulbs with LEDs on a Fiat 500L. Start by using a suitable screwdriver to remove the plastic cover from the lower pa…
How to Install LED Lights on the Fiat 500
How to Install LED Lights on the Fiat 500
Fiat 500 (2007-2022 / 312) If you want to replace the front headlight bulbs with equivalent LED models, you can find the instructions for replacement and installation in the de…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos