Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Fiat Toro?

Model: Fiat Toro MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

Video tutorial

To make the Service light disappear from the instrument panel of the Fiat Toro, you will need to turn the key to turn on the instrument panel: at this point, you will need to press and hold down the accelerator pedal all the way to the floor and immediately after press and release the brake pedal five times.

After these operations, you can release the brake pedal completely first and then the accelerator pedal after a few seconds.

Now you will need to remove the key and turn off the instrument panel in order to turn it on again later and check that the light is off.


Posted on 5 July 2025 by ScegliAuto


Related tutorials

How do you reset the Service light on the Fiat Toro?
How do you reset the Service light on the Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To reset the Service light of the Fiat Toro, you need to insert the ignition key into the block, so that it is possible to turn on the instrument pan…
How to Reset the Service Light on a Fiat Toro?
How to Reset the Service Light on a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To reset the Service light that appears on the instrument cluster of the Fiat Toro, connect a diagnostic tool to the vehicle's OBD port: this is loca…
How do you reset the Service light on a Fiat Toro?
How do you reset the Service light on a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) On the instrument panel of the Fiat Toro, the Service warning light that illuminates can be reset by inserting the ignition key into the correspondin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos