Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Mirror on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Side mirror

How to remove the mirror on a Fiat Panda? Follow these steps: detach the mirror adjustment lever by hand, then unscrew the securing bolt. Use a lever to remove the internal trim part of the mirror (there are plastic clips). Once the trim piece is removed, unscrew the central securing pin of the mirror. Remove the mirror with the glass adjustment cables from the car door. After removing the external mirror, you can fit a new one. Finally, test the correct operation of the mirror.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2003-2012 / 169, MK 2) How do you remove the mirror on a Fiat Panda? This video shows how to remove an external wing mirror on a Panda. Detach the mirror adjustment lever b…
Fiat Panda (2003-2012 / 169, MK 2) How to remove the interior rear view mirror on a Fiat Panda? Follow the mirror removal in the video: enter the vehicle, grasp the mirror located on t…
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, open the front door of your Fiat Panda. Using a thin but sturdy tool as a lever, start by prying off and removing the internal cove…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos