Do it yourself
Frequently asked questions about cars and motorcycles

How to Fold the Rear Seats on Fiat 500L

Model: Fiat 500 500 X - Years 2014-2022
Part: Checks and maintenance

To create space in the boot of the Fiat 500L, press the lever located on the backrest of the seat, move the seat forward, and rest it on the seat base. Pull the metal lever located at the back of the seat base, take the seat and rotate it forward. Repeat these steps on the other rear seats of the vehicle, performing the previously mentioned manoeuvres. To remove the seats from the car, press the lever next to the seat and lift it until it detaches from the metal guides.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2012-2023 / 500 L) Before starting, open the rear doors and the boot of your Fiat 500L. Begin by unfastening and removing the upper cover of the boot, disconnecting the…
Fiat 500 (2012-2023 / 500 L) How do you lower the rear seats of the Fiat 500L? Let’s see how to do it. Open and lift the tailgate, remove the horizontal panel (parcel shelf). Pre…
Fiat 500 (2012-2023 / 500 L) Before starting, open the rear tailgate of the boot of your Fiat 500L. First, unclip the two cords of the parcel shelf, then dislodge and remove the …

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos