Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Pollen Filter on Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Cabin air filter

How to remove the pollen filter on a Fiat Bravo? The cabin filter is located at the bottom left of the glove compartment. Use a plastic lever to detach the covering located at the bottom left of the dashboard, get a screwdriver or a battery drill (if there are screws), remove the cap from the filter holder, then extract the worn cabin filter. Insert a new cabin filter (ensuring it fits snugly around the walls of the box), reattach the cap of the filter box and tighten the screws (if present). Check the correct assembly of the previously installed parts.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Pollen Filter on a Fiat Bravo
How to Replace the Cabin Pollen Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the cabin pollen filter on a Fiat Bravo? Get a screwdriver or a battery drill: remove the plastic cover next to the centre tunnel (rig…
Fiat Bravo cabin air filter replacement
Fiat Bravo cabin air filter replacement
Fiat Bravo (2007-2014 / Bravo 2) In this short and simple guide we will see how to replace the passenger compartment air filter on the Fiat Bravo, following the instructions below. F…
How to replace the air filter on Fiat Bravo
How to replace the air filter on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Unlike what happens in many other car models on the market, the air filter of the Fiat Bravo is not located inside the engine compartment but in the …

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos