Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the heating radiator in the Fiat Punto?

Model: Fiat Punto MK 1, 176 - Years 1993-1999
Part: Heater core

In this video tutorial, we see how to disassemble the internal radiator of the heating system of a Fiat Punto. This is usually due to blockage, so it needs to be cleaned, or because it is punctured and therefore needs to be replaced. We are faced with a job that is not exactly simple and quick to perform, in fact to reach the aforementioned radiator, it is necessary to disassemble a good part of the dashboard, the side panels of the central tunnel and gradually continue until locating it, disconnect the inlet and outlet pipes of the liquid, unscrew the locking pins and finally remove it from its seat.

Posted on 29 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the radiator in the heating system of a Fiat Punto?
How do you replace the radiator in the heating system of a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Noticing the absence of hot air in the cabin of your car, whether it's a Fiat Punto or other models, leads us to think there may be an ongoing issue,…
How to Replace the Air Filter in a Fiat Grande Punto?
How to Replace the Air Filter in a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, see how to replace the air filter in a Fiat Grande Punto, an extremely simple and quick operation. First, ensure that the engine is…
How to Set the Time on a Fiat Grande Punto
How to Set the Time on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos