Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Fiat Punto

Model: Fiat Punto MK 3, 199, Grandepunto , Punto EVO - Years 2005-2018
Part:

The following video tutorial shows us how to reset the TPMS light, related to tire pressure on a Fiat Punto vehicle, after inflating the tires. To reset the TPMS light, it is necessary to turn on the car's instrument panel and press the BACK button, located next to the display of the instrument panel to access the vehicle menu. By pressing the Back button and the Y button simultaneously, located on the instrument panel, we start the pressure update. Once the light has been reset, restart the instrument panel. If it is impossible to reset the light, it is necessary to go to a workshop to check the functioning of the tire sensors.

Posted on 15 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS warning light on the Fiat Punto
Fiat Punto (2005-2018 / MK 3, 199, Grandepunto , Punto EVO) In this mini guide, we will explain how to correctly reset the TPMS sensor installed on the Fiat Punto and consequently how to permanently eliminate …
How to deactivate the airbag warning light on the Fiat Punto Evo.
How to deactivate the airbag warning light on the Fiat Punto Evo.
Fiat Punto (2005-2018 / MK 3, 199, Grandepunto , Punto EVO) Below we will see the steps that will allow us to reset the airbag light of the Fiat Punto Evo, as well as the Grande Punto and other models of the m…
How do you reset the Service light on the Fiat Punto?
How do you reset the Service light on the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, 199, Grandepunto , Punto EVO) In order to reset the Service light that appears on the instrument panel of the Fiat Punto, you will need to connect a diagnostic tool to the OBD por…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos