Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the water pump of the Fiat 500 0.9 TwinAir

Model: Fiat 500 312 - Years 2007-2024
Part: Pump

The main instructions provided in this guide will show us how to disassemble and replace the water pump of the Fiat 500 0.9 TwinAir. First, we open the hood of the car and start disassembling the engine support on the distribution side; we then disconnect the belt from the water pump, and later unscrew the screws securing the cover to remove it, as shown in the video. At this point, we remove and replace the impeller of the pump, then top up with the new coolant; we then reassemble all the other components, topping up after starting the engine if necessary.

Posted on 17 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Water Pump and Timing Belt on a Fiat 500 1.2
Guide to Replacing the Water Pump and Timing Belt on a Fiat 500 1.2
Fiat 500 (2007-2024 / 312) In this guide, you will see the main instructions on how to remove and replace the water pump and timing belt on a Fiat 500 1.2. First, open the bonn…
Replacement of the water pump of the Fiat 500 1.2
Replacement of the water pump of the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) Below we will discover the main steps on how to disassemble and replace the timing belt and water pump of the Fiat 500 1.2. First, we open the hood o…
How to Reset the Service Light on the Fiat 500
Fiat 500 (2007-2021 / 312) In this video, see how to reset the service light for routine maintenance on the Fiat 500 0.9 TwinAir; this procedure can be applied to all vehicles …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos