Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to solve the ventilation problem in the cabin of a Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Blower motor

If the ventilation in the cabin is not working correctly, the problem could be the resistor plug located under the glove compartment. Over time, the contacts can overheat and burn out, interrupting the airflow. The solution is to remove the compartment, locate the damaged plug, and cut the compromised wires. Replace the connector with a new one or connect the wires directly. Check everything, reassemble, and test the fan. If it starts working again, you have solved the problem! Otherwise, it may be necessary to replace the resistor itself. It is not impossible, just requires some manual skills and patience.

Posted on 24 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the ventilation grille of the Fiat Ducato?
How do you remove the ventilation grille of the Fiat Ducato?
Fiat Ducato (2006-2014 / X250) The front ventilation grille of the Fiat Ducato can be removed by following the instructions in the video provided here, in which the assembly is sho…
How do you replace the battery of the Fiat Ducato camper key?
How do you replace the battery of the Fiat Ducato camper key?
Fiat Ducato (2006-2014 / X250) The remote control battery and therefore the key of the Fiat Ducato camper, like most Fiat, Lancia, and Iveco vehicles, is a cr2032 button type. If i…
How do you replace the ventilation nozzles of the Fiat Ducato?
How do you replace the ventilation nozzles of the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) In order to replace the ventilation nozzles of the Fiat Ducato, you need to use an object that can act as a lever, such as a screwdriver, to detach t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos