Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change a tire on a Fiat 500 Storica

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Wheel

See other generations:
Video tutorial

How do you change the tire on a Fiat 500 Storica? Let's see it in this video. The car must be parked on a flat surface, in a safe place, with the gear engaged and the handbrake pulled.

Remove the hubcap, loosen the nuts, lift the car with the jack, positioning it in its anchoring point, under the door. Finish removing the bolts from the wheel and place them in a safe place, then go get the spare tire, which is located in the front compartment - the trunk.

It is a real tire, not a spare tire, and it must be centered on the "centering pin" located on the drum. Put the bolts back in place and tighten them, then lower the car from the jack and tighten the nuts with the wrench.

Put the hubcap back on, put the jack and the flat tire (which you will have repaired) back in place, and the job is done.


Posted on 5 September 2025 by ScegliAuto


Related tutorials

How to Change a Bulb on a Classic Fiat 500
How to Change a Bulb on a Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) Let's see how to diagnose and change a bulb on a classic Fiat 500. First, perform a preliminary check on the fuse box, inspecting the fuses and clean…
How to change the tire of a Fiat 500X
How to change the tire of a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this video, we will see how to change a tire on a Fiat 500X equipped with a spare wheel: we park in a safe flat area and turn on the hazard lights…
How to Use the Tyre Repair Kit for the Fiat 500
How to Use the Tyre Repair Kit for the Fiat 500
Fiat 500 (2007-2024 / 312) Today's guide illustrates how to repair the tyres on the Fiat 500, followed by resetting the tyre pressure warning light. First, open the boot lid an…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos