Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Gear Knob on Your Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Shift knob

See other generations:
Video tutorial

Want to replace the gear knob on your Fiat Panda? Follow these steps: first, take the knob in your hands and twist it left and right until it comes off the gear stick. Use a plastic lever to disconnect the leather gaiter frame (if necessary).

For reassembly: fit the new leather gaiter with the clips (if removed), then take the new knob and slide it onto the stick in the centre console, tightening the new knob until it is secure on the stick. Finally, test the movement of the stick in the centre console to ensure the knob is correctly fitted.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

Removing the Gear Knob on Fiat Panda
Removing the Gear Knob on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the gear knob on the second series Fiat Panda? Let's see how to remove the knob and the trim gaiter. Detach the frame where the leather…
How to Replace the Gear Knob and Gaiter on the Fiat Panda
How to Replace the Gear Knob and Gaiter on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This guide will show you the procedure for removing and replacing the gear knob and gaiter on the Fiat Panda. First, get inside the cabin and start b…
How to Replace the Gear Knob on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, sit in the driver's seat of your Fiat Panda. It is strongly advised to perform this operation with the engine off, to avoid acc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos