Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the service light on the Fiat Fiorino 1.3 Multijet?

Model: Fiat Fiorino MK 3 - Years 2007-2026
Part: Service warning light

The shutdown mode of the service light of the Fiat Fiorino 1.3 Multijet can be defined as simple and executable in a very short time. First of all, this is what must be given maximum attention, we must find out what maintenance interventions need to be carried out on the vehicle for that specific mileage reached, then we will proceed to perform the following: with the instrument panel on, keep the accelerator pedal pressed and at the same time press the brake pedal seven times. After this, we will notice the light flashing and then turning off. Done, the procedure was successful.

Posted on 16 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on the Fiat Fiorino 1.3 MultiJet
Replacing the Diesel Filter on the Fiat Fiorino 1.3 MultiJet
Fiat Fiorino (2007-2026 / MK 3) In this guide, follow the main steps to remove and replace the diesel filter on the Fiat Fiorino with a 1.3 MultiJet engine. First, open the bonnet a…
How do you reset the Service light on the Fiat Fiorino?
How do you reset the Service light on the Fiat Fiorino?
Fiat Fiorino (2007-2026 / MK 3) In order to reset the Service light of the Fiat Fiorino, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found…
How do you reset the Service light on the Fiat Fiorino?
How do you reset the Service light on the Fiat Fiorino?
Fiat Fiorino (2007-2026 / MK 3) The Service light on the Fiat Fiorino's instrument panel can be reset by connecting a diagnostic tool to the vehicle's OBD port: this port is located…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos