Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on the Fiat Fiorino 1.3 MultiJet

Model: Fiat Fiorino MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Diesel fuel filter

See other generations:
Video tutorial

In this guide, follow the main steps to remove and replace the diesel filter on the Fiat Fiorino with a 1.3 MultiJet engine. First, open the bonnet and locate the diesel filter, which is situated behind the engine block.

Next, unscrew the clamp screw and disconnect the fuel hoses, as shown in the video. At this point, disconnect the electrical connector to completely remove the diesel filter; replace the cartridge with a new one and refit the filter in its place!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Change the Oil on a Fiat Fiorino with a 1.3 Multijet Engine?
How to Change the Oil on a Fiat Fiorino with a 1.3 Multijet Engine?
Fiat Fiorino (2007-2026 / MK 3) Changing the engine oil on a Fiat Fiorino with a 1.3 Multijet engine is not much different from what is done on any other vehicle. As always, it is a…
How do you reset the service light on the Fiat Fiorino 1.3 Multijet?
How do you reset the service light on the Fiat Fiorino 1.3 Multijet?
Fiat Fiorino (2007-2026 / MK 3) The shutdown mode of the service light of the Fiat Fiorino 1.3 Multijet can be defined as simple and executable in a very short time. First of all, t…
Replacing the Rear Light Bulb on a Fiat Fiorino
Replacing the Rear Light Bulb on a Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) Replace the rear light bulb on a Fiat Fiorino. Remove the light unit from the rear panel. Use a plastic lever to detach the number plate light unit. …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos