Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the engine starter coils on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Ignition coil

Do you want to remove the coils of your Fiat Panda? Let's see how to proceed. We pull the lever to open the engine compartment located at the bottom left of the dashboard and lift the front hood, we secure the same. The coils are found under the soundproofing panel / filter box of the engine (let's remove it). Unscrew the pins with a suitable screwdriver, then move the reel holder bar to the right and then to the left, until it comes out of the head. We take the new coil holder bar and insert it into the motor head, connect the power supply clamp and lower the plastic clip.

Posted on 21 September 2019 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the starter motor of the Fiat Panda
Replacement of the starter motor of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Below we will see the procedure on how to disassemble and replace the starter motor of the Fiat Panda, in simple steps. First, we open the hood of th…
How do you replace the spark plugs on the Fiat Panda?
How do you replace the spark plugs on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In order to replace the spark plugs on the Fiat Panda, you have to go and open the hood so that you can remove the plastic cover from the upper part …
How to remove the starter motor on a Fiat Panda
How to remove the starter motor on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Let's see how to remove the starter motor on a Fiat Panda. After lifting the front hood from the car and securing the same: we disconnect the termina…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos