Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the air conditioning knobs on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Air conditioning
Operation: How to remove the air conditioning knobs on Fiat 500

How to remove the manual air conditioning knobs on a Fiat 500 to replace the lighting bulbs? Let's see in this video how to proceed. We remove the panel of the ventilation knobs with a plastic lever (first we bring all the knobs to full scale). After disconnecting the air conditioning control panel, we remove the damaged bulbs from the dashboard; mount the new bulbs and get ready to reassemble the panel of the knobs. We are careful not to break the plastic tabs that block the panel. We test the bulbs previously fitted with the ignition of the instrument panel and the controls.


Posted on 6 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2012-2023 - What is the quantity of refrigerant gas for the Fiat 500x and 500l? Read Answer
    • 500 2007-2022 - Why doesn't the hot air work in the FIAT 500? Read Answer
    • 500 2007-2022 - How much gas is needed for the air conditioning of the Fiat 500? Read Answer
    • 500 2012-2023 - How much coolant is needed for the Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos