Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How is the timing belt replaced in a Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Timing belt

See other generations:
Video tutorial

Once a certain mileage is reached and at intervals between one replacement and another, always based on the same amount of kilometers driven, it is necessary to change the timing belt. If desired, this work can also include replacing the accessory belt and the water pump.

Fortunately, we have a detailed video guide here that explains in detail how to proceed with the job. Essentially, the intervention takes place on the right side of the vehicle; we will need to remove the protective cover of the aforementioned belt, loosen the tensioner, slide the belt out of its seat, and install the new one. For the remaining part of the operation, it is sufficient to observe what the video shows.


Posted on 17 December 2025 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Fiat Panda
How to Replace the Timing Belt on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Today, you will learn how to replace the timing belt on a Fiat Panda. First, open the front bonnet of the Panda and loosen the front wheel, then lift…
How to Replace the Timing Belt on a Fiat Panda?
How to Replace the Timing Belt on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Good morning, today's guide aims to replace the timing belt on your Fiat Panda. Start by opening the front bonnet. Next, remove all components relate…
How to Replace the Timing Belt on the Fiat Panda?
How to Replace the Timing Belt on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the timing belt on the Fiat Panda, open the bonnet to access the left side of the engine block: this can be removed to access the underlyi…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos