Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light in a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Service warning light

In the selected tutorial video, you can observe the procedure to reset the service light of a Fiat 500 car. Get inside the vehicle, insert the key, and turn it to the MAR position to activate the instrument panel without starting the engine. Press and hold the odometer button, which you will find on the dashboard near the speedometer; after a few seconds, you will see the message "oil change" appear on the display. Continue to hold the button until you see the text flash and then disappear. At this point, release the button and turn off the ignition. Turn it back on to check the outcome of the operation.

Posted on 31 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Reset Oil Service on Fiat 500
Reset Oil Service on Fiat 500
Fiat 500 (2007-2021 / 312) How do you reset the oil service light? Follow these steps to reset the service on a Fiat 500. Enter the vehicle and turn on the ignition with the ke…
How to reset the Service light on a Fiat 500 Abarth?
How to reset the Service light on a Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) To reset the Service light on a Fiat 500 Abarth, connect a diagnostic tool to the vehicle's OBD port, located on the dashboard just below the steerin…
How to Reset the Service Light on the Fiat 500
How to Reset the Service Light on the Fiat 500
Fiat 500 (2007-2021 / 312) In this guide, you will learn how to reset the service light for the regular oil change maintenance on the Fiat 500 312 by following these simple ste…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos