Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to find the fuse box of the Fiat Panda.

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Fuse box

On the Fiat Panda, the internal fuse box is accessed from the driver's side. Secure the vehicle, turn off the ignition, and remove the key (or deactivate the ignition), then open the driver's door to have enough space to maneuver. Look at the dashboard in the area near the steering wheel: you will find a small plastic cover that closes the access to the fuse compartment. Using your fingers (or a plastic lever to avoid scratching the surfaces), grip the edge of the cover and release it with a controlled pull, without forcing the clips. Once the cover is removed, you will see the cabin fuse panel in front of you. If you need to replace a fuse, use the extractor (when available) and always install a fuse with the same amperage. Before closing, check that the fuse is correctly inserted and that there are no connectors or wiring under tension or bent. To close it, realign the cover and press until you hear the clips snap back into place. If it doesn’t latch immediately, don’t force it: reposition it and try again with even pressure.

Posted on 1 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Fiat Panda?
Where is the fuse box located in the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) The Fiat Panda model 169, from 2012, contains two fuse boxes. The first fuse box is located inside the cabin, on the left side of the dashboard. Insi…
Fuses on Fiat Panda
Fuses on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Let's see how to remove the fuse box on a Fiat Panda. Lift the bonnet, locate the fuse box. Disconnect the cover next to the vehicle's battery and re…
Diagram and Location of the Fuse Boxes on the Fiat Panda
Diagram and Location of the Fuse Boxes on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This guide briefly outlines the steps to locate the fuse boxes and their diagram for the Fiat Panda. First, get into the vehicle to find the internal…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2021 - What is the Fiat Panda brake light fuse? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos