Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Internal Fuse Box and OBD2 Port on Fiat Panda 2

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Fuse box

In this video tutorial, we will look at the location of the internal fuse box and the OBD2 port on the Fiat Panda 169, second generation. The internal fuse box is found on the driver's side, just below the steering wheel; unscrew the two screws of the cover to access it, also locating the OBD2 port as shown in the video. At this point, use the owner's manual to find the code for the faulty fuse, so you can remove it and replace it with a new one (with the same amperage); it is also possible that the fuse you need to find is located in the engine compartment fuse box.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Placement of the fuse box of the Fiat Panda 2
Placement of the fuse box of the Fiat Panda 2
Fiat Panda (2003-2012 / 169, MK 2) In this video we can see that if we are looking for the cause of a malfunction of one of the electrical components of the Fiat Panda, it will be usef…
Diagram and Location of the Fuse Boxes on the Fiat Panda
Diagram and Location of the Fuse Boxes on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This guide briefly outlines the steps to locate the fuse boxes and their diagram for the Fiat Panda. First, get into the vehicle to find the internal…
Fiat Panda Fuse Diagram
Fiat Panda Fuse Diagram
Fiat Panda (2003-2012 / 169, MK 2) The location of the fuse box in the car's cabin is as follows: on the left side of the steering wheel, below the dashboard, there is a cover that nee…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2021 - What is the Fiat Panda brake light fuse? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos