|
Do it yourself
| |||
| ||||
How to change the windshield wipers on the Fiat 500
Model: Fiat 500
312
- Years 2007-2024
To replace the front windshield wipers on the Fiat 500, work with the car off and on a flat surface. Before starting, gently lift the wiper arm away from the windshield and protect the glass with a cloth: if the arm slips from your hand, it can hit the windshield and damage it. With the arm raised, locate the attachment point of the wiper on the arm (hook attachment). Unlock the wiper by acting on the tab/lock near the attachment and slide the wiper until it is released from the hook, always keeping the arm controlled. At this point, take the new wiper and insert it into the hook following the same direction, pushing until the attachment is complete and stable. Check by gently pulling that the wiper does not come off and that it is properly aligned. Carefully lay the arm back on the windshield and repeat the procedure for the other side. Once the replacement is complete, test the wipers with a wet windshield or with the washer fluid, so you can check that the wiper operates without skipping and without unclean areas. If you notice noises or streaking, double-check the attachment and ensure that the size of the wipers is correct for your Fiat 500.
Posted on 15 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat 500
(2007-2023 /
)
Today we will see how to disassemble and replace the rear windshield wiper of the Fiat 500, following the instructions below. First of all, move to t…
Fiat 500
(2012-2023 /
500 L)
In this guide we will see the main instructions on how to disassemble and remove the front windshield of the Fiat 500 L. First, we open the hood of t…
Fiat 500
(2007-2024 /
312)
In order to activate the windshield wipers of the Fiat 500, first you need to insert the key into the ignition switch and turn it to turn on the inst…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.697
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |