Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield wipers of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Windshield wipers

On the second series Fiat Panda, replacing the wipers is done without particular issues. First, work is done on the front wipers: lift the arm, reach the attachment point, and unlock the old wiper by leveraging the tab/lock, then slide it off the mount. In the video, the "guided" motion is clearly shown, without jerks, with one hand holding the arm and the other freeing the wiper. After removing the old wiper, the new wiper is prepared on the Fiat Panda by choosing the right adapter and mounting it on the wiper. There is also a step where small side pins are released by widening the ends of the adapter arm, and it is indicated that, if needed, a thin screwdriver can be used, being careful as the plastic can be damaged or broken if forced. When the adapter is ready, the new wiper is brought to the arm and slid into place until it locks, with the classic final "snap" that makes it stable. The same logic is then applied to the rear wiper of the Fiat Panda, showing the attachment and closure of the adapter once correctly inserted.

Posted on 15 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Fiat Panda
How to Replace the Wiper Blades on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Let's see how to replace the front wiper blades on a Fiat Panda. Grasp the front wiper with your hands, gently pull the movable wiper (without breaki…
How to Replace Wiper Blades on a Fiat Panda 169
How to Replace Wiper Blades on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will replace the front and rear wiper blades on a second-generation Fiat Panda 169 in simple steps. First, start by removing an…
How to replace the rear wiper on a Fiat Panda?
How to replace the rear wiper on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear wiper on a Fiat Panda, lift the plastic cover at the base of the wiper and loosen the nut underneath using a 10 mm spanner. This …

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the Fiat Panda wiper fluid reservoir located? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos