Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Fiat Ducato 2.8

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Timing belt

Let’s briefly review the main information useful for removing and replacing the timing belt on the Fiat Ducato 2.8. First, lift the vehicle and remove the front right wheel; then remove the wheel arch liner and disconnect the alternator belt, as shown in the video. At this point, remove the crankshaft pulley and take off the timing cover; then loosen the tensioner to subsequently remove the timing belt, replacing it with the new original one. Replace the water pump kit if necessary, reassembling all components correctly.

Posted on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) This guide provides key information on how and when to remove and replace the timing belt on the Fiat Ducato 2.3 Multijet; generally, for this type o…
Replacing the Timing Belt on a Fiat Ducato 2.0
Replacing the Timing Belt on a Fiat Ducato 2.0
Fiat Ducato (2006-2014 / X250) Today's instructions will show you the main steps to remove and replace the timing belt on a Fiat Ducato 2.0. First, open the bonnet and start removi…
How to Replace the Timing Belt on a Fiat Ducato 2.3
How to Replace the Timing Belt on a Fiat Ducato 2.3
Fiat Ducato (2006-2014 / X250) In this very short video tutorial, learn how to replace the timing belt on a Fiat Ducato produced from 2006 to 2014. This operation is complicated an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos