Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Service warning light

When the light indicating that it's time to change the oil and filters appears, you can either take the vehicle to a mechanic or do it yourself. After performing the service, the light must be reset. Here are practical tips to turn it off by yourself. Turn on the ignition, press the accelerator and hold it down. While keeping the accelerator pedal pressed, pump the brake pedal at least 6 times. Continue holding the accelerator for at least another 30 seconds. Release the pedals and switch off the ignition. Wait for 60 seconds. Turn the ignition back on; the oil pressure light will flash for a few seconds. You can then switch off.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on a Fiat Ducato
Resetting the service light on a Fiat Ducato
Fiat Ducato (1981-1993 / MK 1) Hello! Today we will explain how to reset the service light on a Fiat Ducato. It is important to remember that this step should only be done after pe…
Reset Service Light on Fiat Ducato
Reset Service Light on Fiat Ducato
Fiat Ducato (2002-2006 / ) In today's video tutorial, you will learn how to reset the service light for routine maintenance on a Fiat Ducato. First, get inside the vehicle and …
How to Reset the Service Light on a 2013 Fiat Ducato
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will find instructions on how to perform the routine maintenance service and reset the service light on a 2013 Fiat Ducat…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos