Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Air filter

See other generations:
Video tutorial

In this useful video tutorial, you will learn how to replace the engine air filter on a Fiat Panda, third series model produced from 2012 onwards. Start by opening the bonnet and securing it with the prop rod. Next, using a 7mm hex key, loosen the six screws securing the air filter cover, three screws under the cover and three screws above the cover as shown in the video.

Once done, you can remove the air filter cover, take out the air filter, and replace it. Finally, close everything by following the reverse procedure.


Posted on 9 April 2026 by ScegliAuto


Related tutorials

Fiat Panda Air Filter Replacement
Fiat Panda (2003-2012 / 169, MK 2) Changing the air filter on a Fiat Panda? Here’s how to remove the air filter from the engine bay. Lift the bonnet and secure it. Unclip the plastics …
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos