Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Maintenance Indicator on Fiat Scudo

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Warning light – error code

Learn how to reset the service maintenance indicator on a Fiat Scudo. This is a very simple operation: enter the vehicle, turn on the ignition, and press the button located above the instrument cluster. Hold this button for ten seconds; a message will appear as shown in the video. Release the button and then press it again (for 5 seconds). Finally, turn off the ignition with the appropriate key, then turn it back on to verify the maintenance has been reset. Always remember to make changes to the onboard computer with the engine off.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Maintenance Indicator on Fiat Scudo
How to Reset the Service Maintenance Indicator on Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Learn how to reset the service maintenance indicator on a Fiat Scudo. This is a very simple operation: enter the vehicle, turn on the ignition (you w…
How to Reset the Service Indicator on Fiat Scudo
How to Reset the Service Indicator on Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Let’s see how to reset the service maintenance indicator on a Fiat Scudo. This operation is very simple: enter the vehicle, turn on the instrument pa…
How to reset the service light on the 2007 Fiat Scudo
How to reset the service light on the 2007 Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) The steps to reset the service light of the 2007 Fiat Scudo are as follows: - get into the vehicle and close all doors; - turn on the instrument pane…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos