Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on the Fiat 500

Model: Fiat 500 Epoca - Years 1957-1975
Part: Engine oil

Briefly, we will see the instructions that will allow us to change the engine oil on the classic Fiat 500. First, open the rear engine cover and start unscrewing the oil filler cap; then lift the vehicle and unscrew the drain bolt located on the sump, allowing the oil to drain into a container for about ten minutes, as shown in the video. At this point, screw the drain bolt back in, then top up with new engine oil (with the specifications indicated in the user and maintenance manual); all that’s left is to start the engine!

Posted on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement on a Fiat 500
Engine Oil and Oil Filter Replacement on a Fiat 500
Fiat 500 (2007-2024 / 312) In this tutorial, learn how to replace the engine oil and oil filter on a Fiat 500. First, open the engine bonnet and unscrew the oil filler cap to a…
How to Replace the Engine Oil and Oil Filter of the Fiat 500 1.3 Multijet
How to Replace the Engine Oil and Oil Filter of the Fiat 500 1.3 Multijet
Fiat 500 (2007-2024 / 312) To perform the routine maintenance service (engine oil and oil filter change), you will need to lift the vehicle; let's see the procedure on the Fiat…
How to Reset the Oil Warning Light on a Fiat 500
How to Reset the Oil Warning Light on a Fiat 500
Fiat 500 (2007-2021 / 312) Before you begin, check that the oil change and the general service on your Fiat 500 have been completed. Then, sit in the driver's seat and close al…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos