Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Wheel on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Wheel

How do you change a wheel on a Fiat 500? Open the boot and take the wheel removal kit, which includes: jack, jack handle, screwdriver, wheel nut key (if present), telescopic wrench, spare wheel or space-saver. Position the jack under the jacking point of the car (under the stiffest part of the chassis), lift the car slightly and loosen the wheel nuts. Raise the car with the jack handle and unscrew the tightening nuts. Fit the space-saver onto the hub with the respective nuts and lower the car to the ground. Always remember to store the removal kit with all its parts back in the boot after maintenance.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wheel with the Spare on a Fiat 500
How to Replace the Wheel with the Spare on a Fiat 500
Fiat 500 (2007-2024 / 312) Today's instructions will show you how to remove and replace the wheel with the spare on a Fiat 500, in simple and quick steps. First, take the spare…
How to Replace the Fog Light Bulb on a Fiat 500 X
How to Replace the Fog Light Bulb on a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Replacing the fog light bulb on a Fiat 500 X is a very simple task that can be done independently. Start by removing the wheel arch liner on the side…
How to Replace the Spare Wheel on a Fiat 500L
How to Replace the Spare Wheel on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this brief video, you will see the instructions for removing and replacing the punctured wheel with the spare wheel on a Fiat 500L. First, open th…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos