Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
169, MK 2
- Years 2003-2012 Today I will show you in this video how to remove the door seal on our Fiat Panda, this operation is not difficult at all, just put a little effort into it and we will easily succeed. First we take a screwdriver that will give us a hand and disassemble the plastic that holds the gasket in the lower part of the door, after which we can move on to disassembling the gasket, insert our fingers inside the gasket and pull it, repeat this operation on the entire edge . Now to mount the new gasket we have to fit it well on the whole edge.
Posted on 22 November 2023 by ScegliAuto
How to replace the Fiat Panda tappet cover gasket?
Fiat Panda (2003-2012 / 169, MK 2) To be able to replace the gasket on the Fiat Panda tappet cover, you have to open the bonnet so that the fixing hooks of the box containing the air f
How to replace the Fiat Panda rocker cover gasket
Fiat Panda (2003-2012 / 169, MK 2) Failure of the tappet cover gasket is a fairly recurring defect on many engines which causes oil to leak with a consequent bad smell which can also b
How to correctly install the gasket of the fuel pump on the tank of a Fiat Panda 900.
Fiat Panda (1980-2003 / 141, MK 1) In this video, we see how to install the pump gasket on a Panda 900: the YouTuber advises to check how the old pump was installed, either by taking a Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |