Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil and Filter on a Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Oil filter

Do you want to replace the oil and filter on a Fiat Ducato? Follow this guide to proceed. Lift the engine bonnet and secure it, then unscrew the oil filler cap. Raise the vehicle on a column lift; unscrew the bolt from the oil sump, allow the fluid to drain into a disposal container, and re-tighten the oil sump bolt. Using a strap wrench, unscrew the oil filter and remove it (fit the new part). Refill with new oil, and measure the oil level multiple times with the metal dipstick until the ideal measurement is reached.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on the Fiat Ducato
How to Change the Engine Oil and Oil Filter on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Changing the oil filter and engine oil on the Fiat Ducato is a straightforward task that can be performed independently, thanks to this brief video t…
How to Change the Engine Oil and Oil Filter in the Fiat Ducato
How to Change the Engine Oil and Oil Filter in the Fiat Ducato
Fiat Ducato (2014-2026 / X290) Below is the procedure to perform routine maintenance by changing the engine oil and oil filter in the Fiat Ducato. First, drain the engine oil by un…
Change oil and filter on the Fiat Ducato
Change oil and filter on the Fiat Ducato
Fiat Ducato (1993-2016 / MK 2) In this video we see how to change the engine oil and filter on a Fiat Ducato X244: we start by going under the vehicle and removing the cap from the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos