Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replace the taillights on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Headlight
Operation: Replace the taillights on Fiat 500

Let's see in this video how to remove the rear light and replace the bulbs on Fiat 500. Open the bonnet of the luggage compartment, unscrew the tightening screws on the side of the light (right) with a screwdriver. We detach the rear light from its housing once all the screws have been removed (remove the power supply terminals) and replace the damaged bulbs with new ones (size and voltage equal). Finally we go to reassemble the lighthouse with attached screws and reconnect the power supply terminals. We test the correct functioning of the previously mounted bulbs. We carry out the replacement on the other headlight.


Posted on 27 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - What can be the reason why the daytime running lights on the Fiat 500 do not light up? Read Answer
    • 500 2007-2022 - Why don't the daytime running lights on the Fiat 500 work? Read Answer
    • 500 2007-2022 - What model are the front position light bulbs of the Fiat 500 series 312? Read Answer
    • 500 2007-2023 - How to remove the headlights on Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos