Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Remove the front disc on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Brake discs
Operation: Remove the front disc on Fiat 500

Worn disc brakes? Let's see the replacement of the front brake of a Fiat 500. We lift the car with a column bridge. Unscrew the pins with a telescopic wrench or compressed air drill and remove the rim, then we begin to unscrew the brake caliper pins by detaching it from the support. With a screwdriver we detach the brake pads. We remove the caliper support and unscrew the pins on the disc brake, pull the disc towards us with our hands in order to remove it from the ruta hub. We assemble the brake disc with all the pins attached, we tighten the caliper support to the disc and the pads, then, we assemble the brake caliper, remembering to tighten all the pins well. Before mounting the rim, we bleed the brake caliper and we go to tighten the pin. We assemble to finish the circle with the locking pins.


Posted on 30 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - How much does it cost to replace the brake discs and pads of the Fiat 500? Read Answer
    • 500 2007-2022 - How much does it cost to replace the brake discs and pads of the Fiat 500? Read Answer
    • 500 2007-2023 - How much does it cost to replace brake discs and pads on the Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos