Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Fiat 500 rear brake discs and pads replacement

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Brake discs
Operation: Fiat 500 rear brake discs and pads replacement

In today's video tutorial we will see all the instructions and steps to be able to remove and replace the rear discs and pads on a Fiat 500. First we remove the rear wheel and lift the car; then let's unscrew the caliper fixing bolts, using a socket wrench, and remove the brake caliper along with the old pads. Then we unscrew the caliper support bolts and screw the screw into the hub in order to extract the brake disc, as shown in the video. We just have to replace the disc and mount the caliper with the new pads!


Posted on 24 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - How much does it cost to replace the brake discs and pads of the Fiat 500? Read Answer
    • 500 2007-2022 - How much does it cost to replace the brake discs and pads of the Fiat 500? Read Answer
    • 500 2007-2023 - How much does it cost to replace brake discs and pads on the Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos