|
Do it yourself
| |||
| ||||
Remove the Fiat Grande Punto key
Model: Fiat Punto
MK 3, 199, Grandepunto , Punto EVO
- Years 2005-2018
Does the Fiat Grande Punto key battery need to be changed? Let's see how it changes. We take our ignition key and click the metal key, we go with the help of a screwdriver to unscrew the tightening screw. We remove the battery holder from the key, extract the battery from the key with a screwdriver and take a new one of the same size and voltage. We reassemble the battery holder in the remote control key, we screw the tiny screw. We close the key inside the key remote control. We check the exact functioning of the key remote control by testing the Fiat door opening and closing buttons.
Posted on 8 June 2020 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(2005-2018 /
MK 3, 199, Grandepunto , Punto EVO)
How to open the cap to refuel? Let's see in this video guide how to open and close the fuel cap on a Fiat Grande Punto. To begin we open the fuel fla…
Fiat Punto
(2005-2018 /
MK 3, 199, Grandepunto , Punto EVO)
Below we will see the main instructions that will allow us to program the key of the Fiat Grande Punto, as well as the Punto Evo. In order to perform…
Fiat Punto
(2005-2018 /
MK 3, 199, Grandepunto , Punto EVO)
Before starting, we will have to sit in the driver's seat of our Fiat Grande Punto. So let's start by activating the instrument panel by turning the …
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.143
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
