Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Pollen Filter on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

Let's replace the pollen filter on a Fiat Panda and see how to remove it. The cabin filter is located at the bottom left-right of the centre tunnel. Using a plastic lever, detach the cover located at the bottom left of the dashboard.

Get a screwdriver or a battery drill, remove the cap from the filter housing, then extract the worn cabin filter. Install a new cabin filter, ensuring it fits snugly around the walls of the housing, reattach the filter housing cap and tighten the screws.

Extract the filter depending on the model of Panda from the right or left.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Where is the pollen filter located in the 2016 Fiat Panda?
Where is the pollen filter located in the 2016 Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) The cabin air filter, more commonly known as the pollen filter, is an essential component that filters the incoming air into the cabin to prevent pas…
How to Replace the Pollen Filter on the Fiat Panda
How to Replace the Pollen Filter on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today, we will see the necessary guide to remove and replace the pollen filter cartridge on the Fiat Panda, following the instructions below. First, …
How to Replace the Pollen Filter on the Fiat Panda 169
How to Replace the Pollen Filter on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) If the pollen filter in your Fiat Panda 169 shows excessive signs of wear that do not ensure optimal air quality, it is time to replace it completely…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos