Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Seats from a Classic Fiat 500

Model: Fiat 500 Epoca - Years 1957-1975
Part: Seat

Removing the rear seats in a classic Fiat 500 is a task that anyone can do, regardless of their experience. The seat consists of two parts: the backrest and the base, with the former being foldable as needed. To remove both, start by taking off the base, which is secured to the car by two hooks on the sides; simply lift it with a slight upward force and then slide it forward. Now, free the backrest by removing the clip on the top buckle and lifting the upholstery; you will notice brackets securing the seat to the floor. Tilt the seat and slide it to the side to release it.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor from a Classic Fiat 500
How to Remove the Starter Motor from a Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) In today's video, see how to proceed with the removal and refurbishment of the starter motor from a classic Fiat 500. This tutorial also applies to t…
How to Replace the Rear Suspension on a Classic Fiat 500
How to Replace the Rear Suspension on a Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) To replace the rear suspension on a classic Fiat 500, lift the car using a ramp or jack so that the wheels are not in contact with the ground. Once l…
How to Clean the Carburettor on a Classic Fiat 500?
How to Clean the Carburettor on a Classic Fiat 500?
Fiat 500 (1957-1975 / Epoca) To clean the carburettor on a classic Fiat 500, you need to completely disassemble the part, removing it from its housing within the engine bay. Once…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos