Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wiper Blade on a Fiat Fiorino

Model: Fiat Fiorino MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield wipers

See other generations:
Video tutorial

Are the wiper blades on your Fiat Fiorino damaged? Here’s how to replace them. Take the front wiper blade; gently pull the blade (without breaking the metal arm) and slide it off the arm on the left.

Fit the new blade onto the movable arm (if the blade is not original, detach the piece as shown in the video), you will hear a click when it is securely attached. Lower the wiper arm onto the windscreen and repeat the same process for the second blade.

Test the new blades by operating the controls.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb of the Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) Today, we will see in this video tutorial the steps to remove and replace the front headlight bulb of the Fiat Fiorino. First, open the bonnet and st…
Where are the fuses located in the Fiat Fiorino?
Where are the fuses located in the Fiat Fiorino?
Fiat Fiorino (2007-2026 / MK 3) The fuses of the Fiat Fiorino are contained within the dedicated fuse boxes installed on the vehicle: this type of vehicle has two boxes that contain…
How to Replace the Front Headlamp on the Fiat Fiorino
How to Replace the Front Headlamp on the Fiat Fiorino
Fiat Fiorino (1988-2014 / MK 2) These short and simple steps will show you how to remove and replace the front headlamp on the Fiat Fiorino, following the instructions below. First,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos