Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb of the Fiat Fiorino

Model: Fiat Fiorino MK 3 - Years 2007-2026
Part: Headlight bulb

Today, we will see in this video tutorial the steps to remove and replace the front headlight bulb of the Fiat Fiorino. First, open the bonnet and start by removing the plastic cover located behind the headlight; then disconnect the electrical connector of the bulb and release the metal clip to remove it from the headlight unit, as shown in the video. At this point, replace the bulb with the new one of the correct type (in this case, an H4 bulb); insert it correctly and reassemble everything!

Updated on 10 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the Rear Light Bulb on a Fiat Fiorino
Replacing the Rear Light Bulb on a Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) Replace the rear light bulb on a Fiat Fiorino. Remove the light unit from the rear panel. Use a plastic lever to detach the number plate light unit. …
How to replace the front headlight of the Fiat Fiorino
How to replace the front headlight of the Fiat Fiorino
Fiat Fiorino (1988-2014 / MK 2) These short and simple steps will show us how to disassemble and replace the front headlight of the Fiat Fiorino, following the instructions below. F…
Replacing the Front Wiper Blade on a Fiat Fiorino
Replacing the Front Wiper Blade on a Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) Are the wiper blades on your Fiat Fiorino damaged? Here’s how to replace them. Take the front wiper blade; gently pull the blade (without breaking th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos