Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Leaf Springs on Classic Fiat 500

Model: Fiat 500 Epoca - Years 1957-1975
Part: Suspension system

In this video tutorial, you will learn how to replace the front leaf springs on the classic Fiat 500 L. Lift the vehicle with axle stands and unscrew the 17 mm bolts of the joints using a socket wrench: to remove them, you need to relieve the tension of the spring by lifting with a jack and then pull the bolt to extract it. At this point, remove the leaf spring and replace it with a new one: the video perfectly illustrates how to replace it and all the useful tips for correct installation. It is recommended to purchase original parts for the proper functioning of your components!

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Timing Instructions for Classic Fiat 500
Timing Instructions for Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) Let’s look at some important instructions for timing the two-cylinder engine of a classic Fiat 500. First, find the top dead centre by rotating the c…
How to Remove the Starter Motor from a Classic Fiat 500
How to Remove the Starter Motor from a Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) In today's video, see how to proceed with the removal and refurbishment of the starter motor from a classic Fiat 500. This tutorial also applies to t…
Guide on How to Adjust the Idle of the Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) In this guide, we will discover some important explanations regarding the carburation of our classic Fiat 500. The carburettor is equipped with manua…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos