Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

Removing a damaged radio from a Fiat Bravo? Here’s how to take it out from the centre console. Use the original metal keys to remove the stereo.

Insert the keys into the slots on either side of the plastic cover of the stereo. Pull the stereo towards you (as shown in the video), being careful of the various wiring (disconnect the power connectors and the antenna cable).

Install the original radio in the centre console, connect the electrical connectors, and secure with screws. If you want to install a non-original radio, you will need to use an adapter.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Where Are the Fuses of the Fiat Bravo Located?
Where Are the Fuses of the Fiat Bravo Located?
Fiat Bravo (2007-2014 / Bravo 2) All the fuses of the Fiat Bravo are contained within two fuse boxes installed inside the vehicle: the first is located in the cabin, behind the panel…
Where are the fuses in the Fiat Bravo?
Where are the fuses in the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) Inside the Fiat Bravo, all fuses are contained in two fuse boxes installed within the vehicle: the first is located inside the cabin, behind the pane…
Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Fiat Bravo (2007-2014 / Bravo 2) The main steps for today will allow us to disassemble and replace the timing belt of the Fiat Bravo 1.9 MultiJet. First, let's raise the vehicle and …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos