Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Bulbs on a Fiat Ducato and Citroen Jumper

Model: Fiat Ducato - Years 2002-2006
Part: Tail light bulb

In this video tutorial, you will learn how to change the rear light bulbs on a Citroen Jumper as well as a Fiat Ducato. We will also see how to remove the rear light unit, as this will be necessary to access the bulbs. Start by unscrewing the two screws of the light unit located at the top and bottom: pull the light unit towards you. Now disconnect the electrical connector and completely remove the light unit. Take out the bulbs by removing the entire plastic block behind the light and rotating the bayonet-style bulbs. Replace them and reassemble everything!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the ignition barrel from the Fiat Ducato - Citroen Jumper - Peugeot Boxer
How to remove the ignition barrel from the Fiat Ducato - Citroen Jumper - Peugeot Boxer
Fiat Ducato (2006-2014 / X250) This guide provides the main instructions to remove and replace the ignition switch or barrel of the Fiat Ducato, as well as the Citroen Jumper and P…
How to replace a light bulb on the front headlight of the Fiat Ducato (Citroen Jumper/Peugeot Boxer)
How to replace a light bulb on the front headlight of the Fiat Ducato (Citroen Jumper/Peugeot Boxer)
Fiat Ducato (2014-2026 / X290) How to replace a headlight bulb on a Fiat Ducato? We see it in this video, remembering that the same procedure is also valid for the Citroen Jumper a…
How to repair the instrument panel of the Fiat Ducato dashboard
How to repair the instrument panel of the Fiat Ducato dashboard
Fiat Ducato (2014-2026 / X290) In this guide we will see the instructions that will allow us to repair the instrument panel of the Fiat Ducato dashboard, but also of the Peugeot Bo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos