Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit Roof Bars on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Roof rack bars

See other generations:
Video tutorial

Fitting roof bars on a Fiat 500? Let's look at how to install the roof bars. The bars must be adjusted according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails.

Once the width of the anchoring brackets is adjusted, tighten the pins with the butterfly bolt (if a lock is present) until they are fully secured to the roof rails of the car. Apply safety caps on both sides. Check the optimal grip of the bars on the Fiat 500's roof without any movement that could damage the seal.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to install the door panel of the 1966 Fiat 500
How to install the door panel of the 1966 Fiat 500
Fiat 500 (1957-1975 / Epoca) Installing the front door panel on a vintage 1966 Fiat 500 is a simple and quick operation to perform independently. We position the brush on the doo…
How to Replace the External Rear-View Mirror on a Fiat 500?
How to Replace the External Rear-View Mirror on a Fiat 500?
Fiat 500 (2007-2021 / 312) Before starting, open the driver's door of your Fiat 500. Begin by unclipping and removing the cover of the external support arm of the mirror. Then,…
How to Remove and Install the Cabin Air Filter on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Learn how to remove and install the cabin air filter on a Fiat 500L. Open the glove compartment and unclip the end-stop arms of the compartment (loca…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos