Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Oil Sump Gasket on a Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Oil pan

Replace the oil sump pump on a Punto? Remove the oil sump from underneath the vehicle. Lift the car on a column lift and locate the oil sump to be removed. Before removing the oil sump, disconnect the pipes underneath it. Unscrew the securing bolts around the oil sump. Once the bolts are removed, take the sump off the vehicle. Fit the new oil sump with its gasket and securing bolts. Reattach all pipes under the oil sump and connect them. Once the replacement is complete, top up with new oil.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Let’s look at the engine oil replacement on a Fiat Punto Evo. Lift the vehicle with a jack, then locate the plug under the oil sump. Unscrew the bolt…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will see how to perform an engine oil change on a Fiat Grande Punto, model from 2005 to 2018. The first step is to open t…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to change the engine oil on a 1300 MultiJet engine? Let's see the procedure on a Fiat Punto. Open and lift the front bonnet, securing it in place…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos