Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light of the Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Tail light

Need to replace the rear light of the Fiat 500? Here’s how to replace the rear light from above the bodywork. Open the boot lid, and use a screwdriver to remove the securing screws located at the side of the light. Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the damaged bulbs with new ones (same size and voltage). Fit the new light and screw in the securing screws after reconnecting the power connectors. Test the correct operation of the previously installed bulbs using the control levers.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Replacing Headlamp Bulb on Fiat 500
Replacing Headlamp Bulb on Fiat 500
Fiat 500 (2007-2024 / 312) Are the bulbs in the headlamp of your Fiat 500 blown? Here's how to change them. Open the front bonnet by pulling the lever located at the bottom rig…
How to Remove and Replace the Rear Light of the Fiat 500 Abarth
How to Remove and Replace the Rear Light of the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In today's video tutorial, you will learn how to remove and replace the rear light of the Fiat 500 Abarth, following the instructions below. First, o…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos