Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in the Panda

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Antifreeze coolant

See other generations:
Video tutorial

How do you replace the coolant in a Grande Punto? Disconnect the lower radiator hose using a socket spanner and allow the fluid to drain into a container. Flush the cooling system with the appropriate flushing liquid: continue this process until the pipes and radiator are completely clean.

Reconnect the hose under the vehicle. Top up the expansion tank with the new coolant.

Start the engine and test the operation of the cooling circuit. Use the coolant specified by the manufacturer.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Remove the Coolant Reservoir Cap for Topping Up on a Fiat Grande Punto 1.3 MultiJet
How to Remove the Coolant Reservoir Cap for Topping Up on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this brief guide, you will learn how to remove the coolant reservoir cap and top up on a Fiat Grande Punto 1.3 MultiJet in simple and quick steps.…
Where is the windscreen washer fluid reservoir located in the Fiat Punto?
Where is the windscreen washer fluid reservoir located in the Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you can see where the windscreen washer fluid reservoir is located in the Fiat Punto, useful in case you need to top it up. As shown, …
How to Replace the Radiator Fluid in a Fiat Punto
How to Replace the Radiator Fluid in a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video, see how to replace the radiator fluid in a Fiat Punto. Disconnect the lower radiator hose using a socket wrench, allowing the rusty fl…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos