Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Radiator on a Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Radiator

Learn how to remove the cooling radiator on a Fiat Bravo. Open the bonnet, and using a suitable socket wrench, remove the plates that secure the radiator at the top, then lift the car on a column lift and loosen the clamp on the water hose. Disconnect the various hoses of the cooling system with pliers. Remove the bumper to access the securing screws located inside. Once free of screws and pipes, you can extract the radiator from the engine bay. Prepare to fit the new part in the engine bay: install the cooling fans, clamps, pins, and various pipes. Refit the bumper after installing the radiator.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Bravo (1995-2001 / ) How do you replace the radiator of a Fiat Bravo? Open the bonnet, and using a suitable socket wrench, remove the plates securing the radiator at the …
Fiat Bravo (2007-2014 / Bravo 2) Using a thin but sturdy plastic tool, lever the side indicator out of your Fiat Bravo. Once done, disconnect the outer cover of the indicator from th…
Fiat Bravo (2007-2014 / Bravo 2) Before starting, sit in the driver's seat of your Fiat Bravo 1.4. Activate the instrument cluster by turning the key in the ignition switch. Next, re…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos